• Positive Pressure systems:

Protect your investment with SmartVent lite - an economical positive pressure ventilation system that draws air from the roof cavity. The air is then passed through a filter and introduced into your home to positively pressurize with fresh, clean air and force out moist, stale air. Your SmartVent lite system uses two sensors located within the home and roof cavity to monitor temperature and is controlled via a simple touch-screen controller. Your SmartVent lite system has the option to be locked to prevent users from switching it off, while still allowing them to alter the fan speed. A great solution for tenanted properties.

Control Condensation with SmartVent positive - a classic positive pressure ventilation system that draws air from the roof cavity and/or outside (optional). The air is then passed throug a filter and introduced into your home to positively pressurize with fresh, clean air and force out moist, stale air. Your SmartVent positive system uses two sensors (roof cavity and within the home) to monitor temperature and is controlled via a multi-function touch-screen controller. Your SmartVent positive system has optional add-ons including heat transfer, summer feature and tempering heaters to provide year-round comfort and other features you would expect from a classic ventilation system.

Control moisture levels with SmartVent evolvea modern positive pressure ventilation system that monitors temperature and humidity levels to give you the driest possible air possible from the roof cavity and/or outside (optional). The air is then passed through a filter and introduced into your home to positively pressurize with fresh, clean air and force out moist, stale air and is controlled via a Wi-Fi-enabled device. Your SmartVent Evolve system comes with a pre-programmed tablet to operate your system or you can choose to use operate it from any smart device or computer. Your SmartVent evolve system has optional add-ons including heat transfer, summer feature and tempering heaters to provide year-round comfort and other features you would expect from an modern ventilation system.

Control Indoor air quality with SmartVent fresh an advanced positive pressure ventilation system that monitors temperature, humidity, VOC and CO2 levels to deliver the cleanest possible air from the roof cavity or outside (optional). The air is then passed through a filter and introduced into your home to positively pressurize with fresh, clean air and force out moist, stale air and is controlled ed via a multi-function colour touch-screen controller. Your SmartVent fresh system has optional add-ons including heat transfer, summer feature and tempering heaters to provide year-round comfort and other features you would expect from an advanced ventilation system. Available September 2018

  • Heat Recovery systems:

Maximise energy efficiency with SmartVent balance an energy efficient, balanced heat recovery ventilation system that simultaneously supplies fresh air from outside while extracting the moist, stale air from inside. Designed to recover the wasted heat produced from everyday activities (up to 92%) by using the warmth from extracted air to temper incoming air. The air is filtered twice and introduced into your home, reducing moisture and refreshing the air. SmartVent balance is operated via a digital wall controller and/or the integrated controller on the unit. SmartVent balance has the latest high efficiency backward curved impellor design ensuring the lowest possible energy consumption and ultra-quiet operation.

Control moisture levels in your modern home with SmartVent synergy evolve – a modern energy recovery ventilation system that monitors temperature and humidity levels to give you the driest possible air possible from the roof cavity and/or outside (optional). Designed to recover the wasted heat produced from everyday activities (up to 70%) by using the energy from extracted air to temper incoming air. The air is filtered twice and introduced into your home reducing moisture and refreshing the air. SmartVent synergy evolve is controlled via your own Wi-Fi-enabled smart device or computer. Your SmartVent synergy system has optional add-ons including secondary air sources and tempering heaters to provide year-round comfort and other features you would expect from a modern ventilation system.

Control Indoor air quality with SmartVent synergy - an advanced energy recovery ventilation system that monitors temperature, humidity, VOC and CO2 levels to deliver the cleanest possible air from the roof cavity or outside (optional). Designed to recover the wasted heat produced from everyday activities (up to 70%) by using the energy from extracted air to temper incoming air. The air is filtered twice and introduced into your home reducing moisture and refreshing the air. Capable of Monitoring temperature, humidity, VOC and CO2 levels to deliver the cleanest possible air and operated via a multi-function colour touch-screen controller. Your SmartVent synergy system has optional add-ons including secondary air sources and tempering heaters to provide year-round comfort and other features you would expect from an advanced ventilation system. Available September 2018

  • SmartVent Positive systems (lite, positive, evolve, fresh) are suitable for most homes and particularly well suited to older homes where timber joinery and older aluminium joinery allow air to be forced out more easily and create better air circulation.
  • SmartVent synergy and balance systems are particularly suited to modern homes that are better insulated with modern joinery which results in homes being more airtight. Synergy systems in these situations are a complete solution (with active extraction) to achieving an optimum healthy home environment.

SmartVent systems cost from as little as 35 cents per day to operate.

*Based on the fan(s) power consumption on maximum speed, running 24 hours per day, over a 30-day period, at $0.26/kWh

No, SmartVent systems uses high-grade filters to greatly reduce harmful particles entering your home. All systems include a high quality F7 hospital-grade filter that captures 80-90% of fine pollens, dusts and allergens from the air, making it cleaner and safe to breathe. A high quality F7 filter is a must for families with asthma and allergy sufferers. F7 Carbon and F7 HEPA/Carbon filters are also available as optional extras.

Yes, SmartVent systems can be installed into your multi-level home, Outlets can be placed around your home by running ducts through wardrobes or other available voids to various levels. It is always best to have a SmartVent accredited installer to assess your home for access.

We recommend that you place an outlet in your living areas and bedrooms. With regard to placement within each room, the outlets should be located centrally within each room. Away from any windows and doors so the air has time to circulate within the room prior to escaping out any windows or doors.

Outlets should be installed at least 1m away from security sensors, smoke alarms, and wall.

They are circular vents, for installation in the ceiling. We also have options for wall grilles, please contact the SmartVent Team for more information.

During the summer months, the temperature of the air in the ceiling cavity can rise significantly. With a summer feature installed, the system will bring in the cooler outside air instead of the hot ceiling cavity air. This provides a system that ventilates all year round maintaining a healthy living environment for you and your family. Summer feature is a must for hay fever sufferers.

    Watch our how-to videos for step by step instructions or contact the SmartVent team on 0800 140 150 for recommended Summer and Winter settings for your system.

    Please follow this link to locate your nearest stockist.

    Make sure you buy a genuine SmartVent filter (product code DCT2093). Look for the green box: if it is not green, it is not a genuine SmartVent filter.

    The SmartVent controller flashes the “change filter” light on the control panel and will also display “Filter Full” on the first line of the display when the filter needs replacing. Replace the filter by accessing the roof cavity with the appropriate version and type.

    Enter the System Setup on the wall controller using the Mode button, press the up-arrow button five times until you get to “Reset Filter Timer”, press the Select button, the display will show “Reset Filter Timer? No”, use the up-arrow button to change the display to “Reset Filter Timer? Yes”, press the Select button to reset the filter timer. The display will revert to “Filter Status”. Press the mode button to exit from the System Setup, and the display will return to normal (no “Filter Full”) and the “change filter” light will be off.

    Watch this how-to video for step by step instructions.

    Browser Update Recommended

    Our website has detected that you are using an outdated browser. Using your current browser may limit your ability to see some features on our website. An upgrade is not required, but it is strongly recommended to receive the best experience on our website.

    Download browser updates